USB DAQ measurement system, USB 2.0 HighSpeed (480 Mbit/s), USB 1.1 compatible (12Mbit/s).

12 analogue measurement channels ±10 V; 225 kHz sample rate (Simultaneous) per channel.
Simultaneous scanning of analog inputs, counters and digital inputs. The resolution of the analog inputs is 16 bit. The inputs are ground referenced together. The sampling rate per channel is 225kHz, the input voltage ranges are ±5 V or ±10 V, the sum sampling rate is 2.7 MHz for 12 channels.
Overvoltage input protection of analog inputs: ±40 V when on or off.

4 channel D/A converter, sample rate 10 kHz, 16 bits, output voltage range ±10 V.

2 x 32 bit event counter (frequency counter: resolution 10Hz), or period length counter and pulse width measurement, resolution 20ns or single channel 32 bit Rotarycounter measurement, 1x, 2x, and 4x interpolation programmable, maximum input frequency 10MHz, switchable zero detection, time stamp resolution 100ns, maximum reading frequency 100kHz. Time stamps allow extremely exact velocity measurement.
External trigger and clock. The event counter, synchronous sampling of counters containing analog values.

8 digital inputs with an input voltage of 2.4 to 30 volts, 8 digital outputs for direct control of the relay up to 60mA per output, isolation voltage 1000V. The supply voltage of the digital outputs is supplied externally in the range of 2.4 to 30 volts, isolation voltage 1000V.

MultiChoice Ethernet and USB in streamlined rugged aluminium cast case.
Signal terminals with  detachable Weidmüller screw terminals.

The device itself is powered over the USB bus.