USB IEPE DSP DAQ 8/16 ch. 500kHz 16 Bit A/D, 4 ch. 16 Bit D/A 100kHz, 24 DIO, 2x32Ct., 2×32 Incr., SSI, PWM, FFT ,PID, FIR-IIR-Filter, con. BNC, G0A-1024-i
G0A-1024-i IEPE ICP®
Intelligent, mobile measurement center, equipped with Freescale digital signal processor DSP 56311 150 MHz and 1.5 MB memory, USB 2.0(480 MBit/s), full compatible to USB 1.1 (12 MBit/s).
Available as 16 channel version with 16 mass-referred/16 differential input channels, all channals have IEPE ICP® powersuply. The device is equipped with 16 Bit AD- and DA converters. Summary sample rate rate is 500kHz, conversion rate 100kHz 16Bit, output range 0-10V, ±10V. 24 bit by bit configurable digital in/output channels, external triggers and external clock. 2x32Bit-50MHz event- (resolution 1/10/100/1000Hz) or cycle duration counter and pulse-width measurement (resolution 20ns). Optional: single-channel 32Bit incremental measurement, programmable 1x, 2x and 4x interpolation, maximum input-frequency 20MHz, neutral position detection disengageable, with time stamp (resolution 100ns). Maximum reading frequency 100kHz. The timestamp allows a highly-precise speed measurement. Overvoltage protection for the analog-channels: ±40 V off-state/on-state. 220V AC/5V DC power supply, FIR and -IIR filter, and online-FFT. are included in the package.
Very powerful analog trigger, oversampling. and characteristic-scaling.
The range of functions goes far beyond what a standard multifunction card offers.
Including an online function: frequency modulation/pulse width modulation, real-time PID controller, FIR and -IIR filters, linearization of the measured values or online FFT.
ICP® is a registered trademark of PCB Group, inc. in Depew, New York
Scheme
YoutubeThe IEPE ICP® supply is available with all 16 analogue input channels of the measurement card. All inputs have a closed instrumentation amplifier; each of the inputs can be switched between DC and AC measurement, as well as difference and mass-referred measurement. The feed of the IEPE ICP® sensors happens directly via the BNC sockets, with 4mA at 28V as supply voltage. To the amplification on the main board of 2/4/8 now another Gain 10 stage comes, for amplifications of max. 80. Each input channel has a bandwidth limitation of 100 kHz, the sum scanning rate amounts to 500 kHz. All signals are captured synchronously, that means that the counters, the digital signals and the analogue input channels where transmitted synchronously with the AD-data. With the IEPE-supply extension the MultiChoice USB is usable in a completely new range of applications like acoustic, vibrations and sonar measurement. The IEPE variant of the MultiChoice USB has all characteristics known form the other USB systems. You can cascade at least 16 systems, thus you have a maximum amount of 256 IEPE input channels at the disposal. ICP® is a registered trademark of PCB Group, inc. in Depew, New York
Free drivers:
DASYLab® 
DIAdem 32/64 Bit® 
LabWindows cvi® LabVIEW® 
E.D.A.S.WinPlus® 
MAIRecoder® MATLAB® 
RogaREC® ServiceLAB®, Windows API Self-programming, other drivers on request.
Product details
| AD | |
|---|---|
| Channels | 16/8 |
| Resolution | 16 Bit |
| Sample rate (sum) | 500 kHz |
| Voltage range | ±10 V; ±5 V; ±2,5 V; ±1,25 V; zusätzlich mit 10x Verstärkung |
| Simultanous sampling | – |
| DA | |
| Channels | 4 |
| Resolution | 16 Bit |
| Output rate (sum) | 200 kHz |
| Voltage range | ±10 V; |
| Counter | |
| Channels | 2 |
| Resolution | 32 Bit |
| Basic frequency | 10 MHz |
| Counter versions | Impulse counter; Frequency counter with resolution 10Hz; optionally: Frequency counter with resolution 1/10/100/1000Hz, period duration counter, pulse width measurement |
| Digital IO | |
| Dig.-In channels | 24 |
| Dig.-Out channels | 24 |
| Dig.-IO channels | 24 |
| Miscellaneous | |
| IEPE | IEPE sensor-supply (4mA, 28V) |
| Instr. amplifier | Instrumental amplifier for all 16/8 analogue channels |
| Real-time signal processing | FIR/IIR-Filter; FFT are included in delivery |
| Optocoupled | – |
| Case | aluminium cast case |
| Dimensions | 150 x 167 x 80 mm |
| Connectors | BNC connectors |
| RoHS compliant | yes |
| Power supply | Inc. Powersupply for 220V AC / 5.2V DC |
| Price | 4.999,00 € |
Optional hard and software extensions
Available hard and software extensions.
The extensions can either be ordered included in delivery or at any time later.
| Hardware options and extensions | Price € |
|---|---|
| (G0A-3090-0) Counter extension | 255,00 |
| (G0A-30A0-0) PWM-extension | 99,00 |
| (G0A-30I0-0) Incremental counter extension | 149,00 |
| (G0A-30E0-4) Automotive extension. Power supply: 9-60V DC / 10W (for G0A-30D0-x) | 299,00 |
| (G0A-30S0-0) 1-Channel SSI-signal recording | 99,00 |
| (G0A-30C0-0) Clip for wall mounting | 18,00 |
| Software options for real-time signal processing | Price € |
| (G0A-4020-0) Realtime scaling | 400,00 |
| (G0A-4040-0) Realtime PID-controller | 400,00 |
| (G0A-4050-0) Onboard function generator | 800,00 |
| (G0A-40X0-0) Realtime functions and Onboard function generator | 1600,00 |
| (G0A-4060-0) Prosys-RT Embedded for Matlab | 930,00 |
| (G0A-4000-i) Extended-Softwaresupport DIAdem | 300,00 |
| (G0A-5000-i) Extended -Softwaresupport DASYLab | 300,00 |
| (G0A-6000-i1) Extended-Softwaresupport LabVIEW | 300,00 |
