Autonomous Ethernet & USB Measurement System:
Ethernet (100MBit/s) & USB 2.0 HighSpeed (480 MBit/s) USB 2.0 Storage (storing Data on an USB-Stick).
Powerful ARM 9 Core, Convenient operation via application software (eg Dasylab) or
Web Interface. Available as 16 channel version with 16 single ended/8 differential inputs or as 8 channel version with 8 single ended/4 differential inputs.
Mixed acquisition of differential and single-ended signals is possible. All versions offer analog inputs and outputs with a resolution of 16 bits. Total sample rate in sum is 2MHz on 16 Channel device, 1MHz on 8 Channel device. Seven input voltage ranges from ±12.28 V to ±0,64V, are separately selecable for each channel. Supply of a DC offset voltage to common is possible for optimal utilization of the converter’s value range.
Input protection of the analog inputs: ± 30 V in both on or off state.
4 channel D/A converter, sample rate 10 kHz, 16 bits, output voltage range ±10 V.
4/8 digital inputs with an input voltage of 2.4 to 30 V, synchronous acquisition of the digital inputs with the analog values and counters.
External trigger & clock. 2 event counter / 1 rotary counter.
4/8 digital outputs for direct control of the relay up to 60mA per output. The supply voltage of the digital outputs is supplied externally in the range of 3.3 to 30 volts. The device itself is powered over the USB bus.
ARM 9 Core (400 MHz) CPU
512 Megabyte DDR2 RAM, 64KBytes Cache
256 Megabyte Flash Memory
USB 2.0 (Device Port) Data Transfer to the Host-System
USB 2.0 (Storage Port) to store Data on an USB-Stick or -Harddisk.
Ethernet interface 100 Mbit / s for PC communication, effective data throughput 70 MB/s